P44000 Temperature Transmitter | Input Pt100 resistance thermometer (RTD) | High isolation up to 6600V
Description
- Transmitter for Pt100 temperature sensors, 2- or 4-wire connection
- Fixed range models for 0 to 150 °C, 0 to 200 °C and 0 to 300 °C input ranges
- Impressed output current of 4 to 20 mA
- Compact 67.5 and 22.5 mm modular housings based on proven VariTrans technology
- High isolation up to 6 kV AC/DC basic insulation and up to 2.5 kV AC/DC reinforced insulation with overvoltage category III and pollution degree 2 according to EN 50178 (input against output and power supply)
- 22.5 mm housing for less demanding isolation requirements up to 2 kV AC/DC (basic insulation)
- Low measurement error of just ± 1 K (typically ± 0.5 K) and short T90 delay time of 100 ms
- VariPower broad-range power supply for 20 … 253 V AC/DC ensures safe operation even with unstable power grids
- Resistant to environmental influences through vacuum encapsulation
- Suitable for extreme environments: ambient temperature during operation –40 … +85 °C
- 5-year warranty
When temperatures are to be measured using Pt100 resistance thermometers in high-voltage environments, standard temperature transmitters are often unsuitable due to their insufficient insulation.
Resistance thermometers can be insulated against high voltage. In practice, however, the available installation space is often too small. Moreover, the insulation is weakened by thermal and mechanical aging.
For temperature measurement on power electronics components, maximum safety is therefore provided by high-voltage resistant galvanic isolation. A typical application is the monitoring of the winding temperature of electric motors, generators or transformers.
The Solution:
Pt100 Transmitter With 6 kV AC/DC Basic Insulation
The new ProLine P 44000 transmitter for high-voltage applications converts the resistance of a 2- or 4-wire Pt100 resistance thermometer into a 4 to 20 mA signal with high accuracy and short delay times.
The output signal is galvanically isolated from the input signal and the voltage supply. The isolation is designed for working voltages of up to 6 kV AC/DC. During routine testing, the test voltage is 15 kV AC. Vacuum encapsulation protects the circuit against environmental influences and ensures that the extraordinary isolation properties are maintained.
The product line covers the standard ranges of 0 to 150 °C, 0 to 200 °C and 0 to 300 °C. The transmitters are available in 67.5 and 22.5 mm modular housings to suit different requirements.
Condition Monitoring of High-Voltage Motors
mars 2021
Interface Technology
Nous attendons avec impatience votre réponse!
Nous Contacter
| Alimentation électrique: | 24 V CA, 24 V CC, 110 / 115 V CA, 220 / 230 V CA, Bloc d'alimentation à plage élargie |
|---|---|
| Catégorie de produits: | Amplificateur séparateur haute tension, Convertisseur de mesure |
| Fréquence limite: | < 1 kHz |
| Gamme de produits: | ProLine |
| Tension d'essai: | 2,5 kV, 5 kV, 10 kV, 15 kV, 510 V |
| Type d'appareil: | Convertisseurs de température |
| Entrée: | Thermomètres à résistance |
| Sortie: | 4 … 20 mA |
| Tension de service min.: | 50 V, 300 V, 1000 V, 2000 V, 3600 V, 4800 V, 6600 V |
| Classe d'erreur: | < 0,5 % |
| Boîtier: | Boîtier série 17,5 … 67,5 mm |
Téléchargements
Brochures
Fiches techniques
Certificats
Notre service
Lorem lorem ipsum ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.
Utilisé dans les processus ou les applications
Produits apparentés
Articles de blog pertinents
avr. 2023
Process Analytics
Robust WA111 Retractable Fitting Made of Plastic for Highly Corrosive Operating Conditions
avr. 2023
Process Analytics
Coopération réussie : Knick a développé un support rétractable spécial Ceramat WA 155 pour les sondes optiques de SOPAT.
juil. 2020
Process Analytics
Canne d’immersion haute qualité pour applications mobiles
juil. 2020
Process Analytics
Canne d'immersion modulaire en version électriquement conductrice
févr. 2018
Process Analytics