A20340 Signal Multiplier | Input 0(4) … 20 mA or 0…10V | 4x 500 ohms output load
Product number:
A20340
Description
A20340 Signal Multiplier | Input 0(4) … 20 mA or 0…10V | 4x 500 ohms output load
Signal multiplier with four calibrated outputs, also for applications with high output loads.
- Safety in the smallest space
6-port isolation in 22.5 mm modular housing - Signal multiplication
combined with signal conversion - Load increase
up to 1000 ohms possible for inputs with high input impedances - Standards-compliant personal protection
through protective separation according to EN 61140 - Precise signal reproduction
thanks to a short response time of T90 = 1 ms, even dynamic signal changes are accurately reproduced - Low-cost solution
only one compact, low-cost device is required instead of four conventional signal conditioners
The A20340 signal multiplier is an extremely compact product that also provides a cost-effective solution to the problem. In this module, the input, all 4 outputs, and the power supply are safely decoupled from one another (six-port isolation).
In addition to “quadrupling” the analog signal, the A20340 is capable of calibrated signal transmission with signal isolation.
We look forward to hearing from you!
Contact Us
| Product Category: | Signal Multiplier |
|---|---|
| Device Type: | Isolated Standard Signal Conditioners |
| Input: | (±)20 mA, 4 … 20 mA |
| Output: | 4 … 20 mA |
| Working Voltage, Min.: | 50 V, 300 V |
| Test Voltage: | 2.5 kV, 510 V |
| Fault Class: | < 0.5 % |
| Housing: | 17.5 … 67.5 mm Modular housing |
| Cutoff Frequency: | < 1 kHz |
| Power Supply: | 24 V DC |
| Product Line: | ProLine |
Downloads
Used in Process or Applications
Related Products
Relevant Blog Posts
Jan 2018
Interface Technology
Knick Products Comply With UL - What Does That Mean?
There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.