MemoRail A1401 Compact Multiparameter Transmitter | Memosens Sensors | Ex | 1x 4…20 mA Passive Output | 24 V DC Power Supply
Description
MemoRail A 1401 is the first genuinely compact, digital analyzer for measuring pH/ORP, conductivity, oxygen and temperature with Memosens and digital sensors.
Plug & Measure
Pre-calibrated Memosens sensors reduce operating costs and maximize the availability of the measuring point.
Memosens
Optimum availability of the measuring point is achieved by using pre-calibrated sensors with contactless Memosens technology. Calibration is no longer carried out on site but under reproducible conditions in the lab using the new MemoSuite software tool. Individual sensor data are always directly assigned to each Memosens sensor. Problems at the connector involving humidity, corrosion or even defective galvanic isolation are a thing of the past.
Compact
The highly space-saving modular housing of the MemoRail devices is only 12.5 mm wide.
Cost-Efficient
The outstanding properties of MemoRail enable the implementation of measuring stations with low overall costs, especially in combination with modern Memosens sensors specially tailored for use with MemoRail.
Universal Use
MemoRail A1401 is an attractively priced solution in process analytics and optimally suited for use in numerous industry segments, such as chemicals, pharmaceuticals, biotechnology, food and beverage, or energy.
With its narrow modular housing, MemoRail A1401 is perfectly suited to installation in restricted spaces – e.g, in control cabinets, fermenters or in process plants.
- 24 V DC power supply (via plug-in terminals or DIN rail bus connector)
- 1 current output 4 to 20 mA, (passive)
- Space-saving modular housing, 12.5 mm wide
- Multiparameters: measurement of pH/ORP, conductivity, oxygen and temperature
- Memosens communication
- Simple configuration via DIP switches
MemoSuite – The Software Tool
Fast and User-Friendly
The MemoSuite software allows calibrating Memosens sensors under reproducible conditions in the lab. MemoLink connects the sensors to the PC. On-site calibration under adverse ambient conditions is no longer necessary. The only thing required there is the quick and uncomplicated replacement of the used sensors with pre-calibrated sensors.
Two Versions
MemoSuite Basic and MemoSuite Advanced meet different application-specific requirements:
MemoSuite Basic
calibrates Memosens sensors.
MemoSuite Advanced
not only performs a calibration, but also provides diagnostics and database documentation of the sensors. The database meets the requirements of GMP and FDA CFR 21 Part 11.
여러분의 의견을 기다리겠습니다!
문의하기
| 2선식 또는 4선식: | 4-선식 |
|---|---|
| permanently installed / portable: | permanently installed |
| 센서 연결: | Memosens |
| 승인: | UL |
| 외함: | PA 66 |
| 전류 출력: | 1 x 4…20 mA, passive |
| 전원 공급장치: | 24 V DC |
| 제품 라인: | MemoRail |
| 채널: | 1 채널 |
| 측정 파라미터 : | pH/ORP, 다중 매개변수, 용존 산소, 전도도 |
| 통신(출력, 디지털): | 아날로그 4-20mA |
| 폭발 방지: | UL Class I, Div. 2 |
| 구조: | 12.5 mm 모듈식 외함 |
다운로드
데이터 시트
서비스
Lorem lorem ipsum ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.
프로세스 또는 애플리케이션에서 사용
관련 제품
관련 블로그 게시물
4월 2023
Process Analytics
Sturdy 2-Electrodes Conductivity Sensor SE625 with Coaxial Electrodes made of Titanium
6월 2022
Process Analytics
Combined pH- and ORP-Sensor SE555X/*-AMSN
11월 2021
Process Analytics
SE655X 디지털 및 SE656X 디지털 - 방폭 인증을 받은 디지털 전도도 센서
5월 2021
Process Analytics
새 디지털 전도도 센서 SE656N
2월 2018
Process Analytics