P32200 Sensor Transmitter | Input strain gauges and load cells | For safety circuits up to SIL3 | Configuration interface for PC
Description
The universal P32200 strain gauge transmitters provide connection possibilities for all standard strain gauge force transducers and strain gauge load cells in full bridge configuration. They can be flexibly adapted to the respective measuring task using DIP and rotary encoder switches or via an IrDA port.
- Universal usability
for strain gauges, pressure and load cells, and other resistive measuring bridges - Convenient setting of all parameters
via IrDA interface. Uncomplicated, menu-guided adjustment also “on site“ including archiving of the configuration data. - Intuitive configuration
of the basic parameters. Easy, without tools, using 4 rotary and 8 DIP switches - Calibrated range selection
No complicated trimming - Convenient adjustment
Zero point and sensitivity adjustable via IrDA port - Simulation
of any desired output values for correct installation/commissioning - Protective separation
according to EN 61140 - protection of the maintenance staff and subsequent devices against excessively high voltages up to 300 V AC/DC - Functional safety
up to SIL 2 (up to SIL 3 in case of redundant configuration) with TÜV certificate Systematically developed according to EN 61508 - High accuracy
due to innovative circuit design - Minimum space consumption
in the enclosure. Modular housing: just 6 mm wide. More transmitters per meter of DIN rail - Low-cost assembly
Quick mounting, convenient connection of power supply through DIN rail bus connectors (in case of 24 V DC power supply) - 5-year warranty
3-port isolation with protective separation up to 300 V AC/DC according to EN 61140 ensures optimal protection of personnel and equipment as well as unaltered transmission of the measurement signals. The P32200 offer maximum performance in the smallest of spaces.
Adjusting the zero point and sensitivity to the individual strain gauge sensor is particularly convenient via the infrared port, for example using a PDA. Sensors with known characteristics can be very easily calibrated using 4 rotary encoder switches and 8 DIP switches. Special measuring tasks can be solved with SensoTrans devices that Knick configures according to individual specifications. Fixed-range devices without switches are used, for example, when manipulations or mix-ups must be precluded.
Knick offers the P32200 transmitter with SIL approval for applications with high demands on functional safety. The requirements of EN 61508 were implemented through specially developed hardware and software. The implemented fail-safe concept makes use of structural measures at the device level (redundancy of system components) and diagnostic methods for selective fault detection. The product is SIL 2 approved (EN 61508) by an authorized body (TÜV Rheinland). SIL 3 in redundant implementations
Knick Products Comply With UL - What Does That Mean?
1월 2018
Interface Technology
여러분의 의견을 기다리겠습니다!
문의하기
| 기기 타입: | DMS 트랜스미터 |
|---|---|
| 승인: | CSA, SIL, UL |
| 전원 공급장치: | 24 V DC |
| 제품 라인: | ProLine |
| 제품 카테고리: | 측정 변환기 |
| 차단 주파수: | < 1 kHz |
| 입력: | 스트레인 게이지 / 로드 셀 |
| 출력: | 0 … 10 V, 0 … 20 mA, 4 … 20 mA, ±10 V, ±20 mA |
| 최소 작동 전압: | 50 V, 300 V |
| 최소 시험 전압: | 2,5 kV, 510 V |
| 오류 등급: | 0.1 %, < 0.5 % |
| 구조: | 6 mm 모듈식 외함 |
다운로드
Manuals
인증서
서비스
Lorem lorem ipsum ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.
프로세스 또는 애플리케이션에서 사용
관련 제품
관련 블로그 게시물
4월 2023
Process Analytics
Robust WA111 Retractable Fitting Made of Plastic for Highly Corrosive Operating Conditions
4월 2023
Process Analytics
Successful joint project : Knick developed the special Ceramat WA 155 retractable fitting for optical probes from SOPAT
7월 2020
Process Analytics
(현장에서) 휴대용으로 사용할 수 있는 고품질의 침적식 피팅
7월 2020
Process Analytics
방폭 지역에서의 사용을 위한 전기 전도성이 있는 버전의
2월 2018
Process Analytics