P22400 Isolated Standard Signal Conditioner | Input 0(4) … 20 mA | For safety circuits up to SIL3
Description
Functional safety and maximum availability can go together
- Functional safety up to SIL 3
acc. to EN 61508 with certificate from an accredited testing body - Average failure rate
MTBF: 965 years - Low transmission error
0.08 % full scale - High isolation including protec-tion against electric shock
by reinforced insulation up to 600 V AC/DC - Test voltage 5.4 kV AC
- Minimal losses and low installation effort
thanks to loop-powered operation - Robust design
- Mechanically stable
approved by an independent test-ing laboratory, suitable for marine applications - Ambient temperature range during operation: -40 … +85 °C
- Resistant against electromagnetic interferences, meeting stringent SIL requirements
- 5-year warranty
Passive isolators with a technologi-cal advantage: fewer parts mean rare failures. For measurement and safety reasons, analog signals are routinely isolated in industrial facilities.
The requirements on plant and safety-related circuits are continuously increasing, for instance because of a growing awareness of occupational safety. Thereby, the technical require-ments on components are also being raised. However, higher functional safety is often bought by more effort and at the expense of availability. This does not have to be the case, as proven by P22400 passive isolator for standard signals.
Its operating principle enables the implementation of a product that combines high functional safety with high availability in a unique way – a balancing act that would otherwise be hard to achieve.
SIL 3 even in single-channel structure
P22400’s safety functionality is the highly precise, linear transmis-sion of 4 ... 20 mA signals.
A high level of functional safety can be achieved even in single-channel structure and without diagnostics. For instance, sensors and actuators in safety circuits can be directly connect-ed, requiring no elaborate evaluation equipment for redundant structures. At the same time, the device has a low total failure rate and provides high availability.
After all, what good is a safety device that will keep turning off (switch to a safe state) and thereby regularly close down the facility it is meant to monitor?
P22400 is safe and highly available.
Knick Products Comply With UL - What Does That Mean?
1月 2018
Interface Technology
Functional safety and maximum availability can go together
2月 2017
Interface Technology
我们期待您的来信
联系我们
| 产品类别: | 通用隔离器 / 标准信号隔离器 |
|---|---|
| 截止频率: | < 1 kHz |
| 最小工作电压: | 50 V, 300 V, 1000 V |
| 最小测试电压: | 2,5 kV, 5 kV, 510 V |
| 电源: | 环路供电 |
| 设备类型: | 标准信号倍增器 / 分离器, 环路供电标准信号隔离器，无辅助电源 |
| 输入: | (±)20 mA, 4 … 20 mA |
| 输出: | 0 … 20 mA, 4 … 20 mA |
| 误差级别: | 0.1 %, < 0.5 % |
| 结构型式: | 12.5 mm 模块化外壳 |
下载
证书
我们的服务
Lorem lorem ipsum ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.
相关产品
相关的博客文章
4月 2023
Process Analytics
pH and conductivity measurement in vaccine production
4月 2023
Process Analytics
Sturdy 2-Electrodes Conductivity Sensor SE625 with Coaxial Electrodes made of Titanium
6月 2022
Process Analytics
Combined pH- and ORP-Sensor SE555X/*-AMSN
11月 2021
Process Analytics
SE655X 数字式和 SE656X 数字式 - 具有防爆认证的数字式电导率传感器
5月 2021
Process Analytics
新型数字式电导率传感器 SE656N
2月 2018
Process Analytics
How to get the sensor into the process
2月 2017
Process Analytics