P16800 Speed Signal Doubler | Input speed sensor signal 10 … 33.6 V DC (max.35 V) | Safe decoupling acc. SIL4, safe transmission acc. SIL2
Description
Doubling, Conversion, and Isolation of Speed Sensor Signals
- Doubling of speed signals and thus simplification of system integration in rolling stock
- Optional conversion of the speed signal and thus increased compatibility of speed sensors
- Galvanic isolation of the speed signal and thus protection of downstream components
- Functionally safe signal processing according to EN 50129 (SIL 4 and SIL 2)
- Compact modular housing for DIN rail or wall mounting
The P16800 speed signal doubler is used to double the signals from speed sensors. It decouples signals from single or dual-channel speed sensors in a functionally safe and non-interacting manner in accordance with EN 50129 (SIL 4). The pulses are transmitted 1:1 from the input to the output, i.e., frequency and phase angle remain unchanged. The transmission of the rotary encoder signals is also functionally safe in accordance with EN 50129 (SIL 2), whereby the P16800 also galvanically isolates the signals. For the connected controller, the outputs of the P16800 appear like a rotary encoder. Like the rotary encoders, the P16800 is supplied with power via the connected controller.
If required, the signal can be converted from a current signal to a voltage signal or from a voltage signal to a current signal. Optionally, the frequency at the output can be reduced compared to the input at a ratio of 2:1, 4:1, or 8:1.
Use of the P16800 simplifies the retrofitting of rolling stock with control systems that require speed information, or makes such retrofitting possible in the first place. In new vehicles, the number of speed sensors can also be reduced, which optimizes acquisition and maintenance costs.
Nous attendons avec impatience votre réponse!
Nous Contacter
| Alimentation électrique: | 24 V CC, Autres |
|---|---|
| Catégorie de produits: | Convertisseur de mesure, Multiplicateur de signal |
| Fréquence limite: | 10 kHz |
| Gamme de produits: | ProLine |
| Tension d'essai: | 2,5 kV, 510 V |
| Type d'appareil: | Convertisseur de fréquence |
| Entrée: | Entrée de fréquence |
| Sortie: | Autres |
| Tension de service min.: | 50 V, 300 V, 1000 V |
| Classe d'erreur: | 0,02 %, 0,1 %, < 0,5 % |
| Boîtier: | Boîtier série 17,5 … 67,5 mm |
Téléchargements
Manuals
Brochures
Fiches techniques
Certificats
Installation guides
Notre service
Lorem lorem ipsum ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.
Utilisé dans les processus ou les applications
Produits apparentés
Articles de blog pertinents
avr. 2023
Process Analytics
Robust WA111 Retractable Fitting Made of Plastic for Highly Corrosive Operating Conditions
avr. 2023
Process Analytics
Coopération réussie : Knick a développé un support rétractable spécial Ceramat WA 155 pour les sondes optiques de SOPAT.
juil. 2020
Process Analytics
Canne d’immersion haute qualité pour applications mobiles
juil. 2020
Process Analytics
Canne d'immersion modulaire en version électriquement conductrice
févr. 2018
Process Analytics