Passa alla homepage
Mostra tutte le categorie Sensori Indietro

SE706 Sensore di ossigeno | Memosens | 120 mm | Ex | Campo di misura (risoluzione) 0 ... 50 mg/l (6 μg/l)

Salta la galleria di immagini
SE 706 X
Ex Alt
Lunghezza
Connettore
Codice prodotto: SE706X/1-NMSN
Descrizione Dettagli tecnici Scaricamento Utilizzato nei processi o nelle applicazioni Post rilevanti del blog

Description

SE706 Sensore di ossigeno | Memosens | 120 mm | Ex | Campo di misura (risoluzione) 0 ... 50 mg/l (6 μg/l)

Sensore dal design robusto e igienico in acciaio inox, alta precisione e basso limite di rilevamento, manutenzione semplice e veloce grazie alla speciale membrana, digitale, con tecnologia Memosens.

  • Perfetta separazione galvanica grazie alla tecnologia Memosens
  • Nessuna influenza dell'umidità nel connettore
  • Pre-calibrabile in laboratorio
  • Trasmissione dei dati digitale
  • Diagnostica integrata dei sensori
  • Elevato livello di sicurezza del processo
  • Materiali durevoli
  • Design robusto
  • Facile da pulire grazie alla superficie estremamente liscia
  • Servizio efficiente in termini di costi grazie al modulo a membrana e al corpo interno facilmente sostituibili
  • Design igienico
  • Alta risoluzione di 6 ppb
  • Funzionamento anche in aree pericolose

Misura affidabile in linea dell'ossigeno disciolto, anche in condizioni sterili e igieniche. Elevata stabilità del segnale. Manutenzione semplice grazie al design modulare.

Membrana speciale con maglia in acciaio e rivestimento in PTFE. Sterilizzabile, autoclavabile e con possibilità di CIP. Adatto anche all'uso in aree pericolose.

Applicazioni
Biotecnologia, industria farmaceutica, fermentazione, vari campi della chimica analitica

Non vediamo l'ora di ascoltarvi!
Contatto

Dettagli tecnici

Campo di misura : pO₂ < 1200 mbar
Connettore: Memosens
Lunghezza: 120 mm
Materiale della membrana: PTFE/Silikon/PTFE, FDA-konform (mit Stahlnetz armiert)
O-ring material (process-wetted): Silikon (FDA & USP Class VI geprüft)
Omologazioni: FM, IECEx, JapanEx
Parametro di misurazione: Ossigeno
Parti del sensore a contatto con fluidi: Acciaio inox 1.4404 (certificato materiale 3.1)
Permissible pressure range (measurement): 0,2 … 6 bar absolut
Precisione: 1 % + 4 ppb
Protezione contro le esplosioni: Ex
Resistenza alla pressione meccanica: max. 12 bar assoluti
Segnale nell'aria ambiente: 50 ... 110 nA
Segnale residuo in terreno privo di O₂: ≤ 0,1% del segnale in aria ambiente
Sonda di temperatura: NTC 22 kΩ
Measuring Principle: Amperometrisch
Flow dependence: ≤ 5 %
Signal Transmission: digital
Temperature range (stability): –5 ... +135 °C (dampfsterilisierbar/autoklavierbar)
Surface roughness: N 5 (RA < 0,4 μm)
Interior body incl. electrodes: tauschbar (ZU 0567)

Scaricamento

Manuals

[16286] User Manual (DE, EN, KO)
Memosens Cable CA/MS
Version 09
[3061] User Manual
SE706 Memosens Oxygen Sensor
Version 04

Brochure

[13395] Opuscolo
Sensori - Per la misurazione del valore di pH/Redox, conduttività e ossigeno. Digitale ed analogico.

Schede tecniche

[10145] Data sheet
Accessories for Sensors for Oxygen Measurement
Product Description | Specifications | Product Range
[3052] Data sheet
SE706 Memosens Oxygen Sensor
Product Description | Specifications | Product Range

Certificati

[12831] IECEx Certificate of Conformity
Memosens Ex Sensors | Details see Document
Document No. IECEx BVS 16.0030X, issue No. 2 | 2024-02-23
Marking: Ex ia IIC T3/T4/T6 Ga
[12781] EU Declaration of Conformity (DE, EN, FR)
No. EU210706D | 2021-07-06
Memosens Measuring Cable Type CA/MS-...X.., CA/MS-...X..-L
[11064] EU Declaration of Conformity
No. EU210427A | 2021-04-27
Memosens Sensors | Types SE 5..X..-.MS., SE604X-MS**, SE605….., SE6**X**MS, SE7**…
[14685] Certificate of Conformity (FM)
No. FM17US0208X | 2019-05-27 | USA
Memosens Sensors | Types SE 5**, SE 6** and SE 7**
[12902] Confirmation / Bestätigung
Series SE706X/*-NMSN, SE707X/*-NMSN
No components of animal origin / Kein tierischer Ursprung
[14155] Declaration of Compliance 2.1 (DE, EN)
according to EN 10204 | gemäß EN 10204
[16639] Type Approval Certificate for Ex-Equipment (JA)
No. DEK19.0046X, Issue No. 0 (Japan)
SE5**X/*-*MSN | SE7**X/*-*MSN
[12826] EU-Type Examination Certificate (DEKRA)
Nr. BVS 16 ATEX E 037 X | 2024-02-20
Memosens-Ex-Sensors
[16292] Korean safety certificate Kosha (KO)
No. 2020-KA4BO-0368X
Measuring Cable CA/MS
[17559] Korean Safety Certificate
Ex ia IIC T3/T4/T6 Ga / 23-KA4BO-0104X
SE706X/*-NMSN;SE707X/*-NMSN
2023-02-21

Control Drawings

[14185] Control Drawing
Inductive Sensor-Cable Connection System Memosens
Zeichnungsnummer 214.410-240

Servizio Unser

Lorem lorem ipsum ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.

Utilizzato nei processi o nelle applicazioni

Processi di birrificazione
The taste and quality of beer greatly depend on the quality of the water used to brew it. pH and conductivity measurements determine its quality. Globalization is putting massive competitive pressure…

Prodotti correlati

Salta la galleria dei prodotti
SE 706 X
SE706 Sensore di ossigeno | Memosens | 120 mm | Ex | Campo di misura (risoluzione) 0 ... 50 mg/l (6 μg/l)
Codice prodotto:

SE706X/1-NMSN

SE 706 X
SE706 Sensore di ossigeno | Memosens | 220 mm | Ex | Campo di misura (risoluzione) 0 ... 50 mg/l (6 μg/l)
Codice prodotto:

SE706X/2-NMSN

SE706 Sensore di ossigeno | VP | 120 mm | Campo di misura (risoluzione) 0 ... 50 mg/l (6 μg/l)
SE706 Sensore di ossigeno | VP | 120 mm | Campo di misura (risoluzione) 0 ... 50 mg/l (6 μg/l)
Codice prodotto:

SE706/1

SE706 Sensore di ossigeno | VP | 220 mm | Campo di misura (risoluzione) 0 ... 50 mg/l (6 μg/l)
SE706 Sensore di ossigeno | VP | 220 mm | Campo di misura (risoluzione) 0 ... 50 mg/l (6 μg/l)
Codice prodotto:

SE706/2

SE707 Sensore di ossigeno | Memosens | 120 mm | Ex | Campo di misura (risoluzione) 0 ... 50 mg/l (1 μg/l)
SE707 Sensore di ossigeno | Memosens | 120 mm | Ex | Campo di misura (risoluzione) 0 ... 50 mg/l (1 μg/l)
Codice prodotto:

SE707X/1-NMSN

SE707 Sensore di ossigeno | Memosens | 220 mm | Ex | Campo di misura (risoluzione) 0 ... 50 mg/l (1 μg/l)
SE707 Sensore di ossigeno | Memosens | 220 mm | Ex | Campo di misura (risoluzione) 0 ... 50 mg/l (1 μg/l)
Codice prodotto:

SE707X/2-NMSN

SE707 Sensore di ossigeno | Memosens | 320 mm | Ex | Campo di misura (risoluzione) 0 ... 50 mg/l (1 μg/l)
SE707 Sensore di ossigeno | Memosens | 320 mm | Ex | Campo di misura (risoluzione) 0 ... 50 mg/l (1 μg/l)
Codice prodotto:

SE707X/3-NMSN

SE707 Sensore di ossigeno | VP | 120 mm | Campo di misura (risoluzione) 0 ... 50 mg/l (1 μg/l)
SE707 Sensore di ossigeno | VP | 120 mm | Campo di misura (risoluzione) 0 ... 50 mg/l (1 μg/l)
Codice prodotto:

SE707/1

SE715 Sensore di ossigeno | Memosens | 120 mm | Per il trattamento delle acque e delle acque reflue
SE715 Sensore di ossigeno | Memosens | 120 mm | Per il trattamento delle acque e delle acque reflue
Codice prodotto:

SE715/1-MS

SE740 Sensore ottico di ossigeno | M12 (8 pin) | 120 mm | Per ambienti igienici esigenti
SE740 Sensore ottico di ossigeno | M12 (8 pin) | 120 mm | Per ambienti igienici esigenti
Codice prodotto:

SE740/1

SE740 Sensore ottico di ossigeno | M12 (8 pin) | 215 mm | Per ambienti igienici esigenti
SE740 Sensore ottico di ossigeno | M12 (8 pin) | 215 mm | Per ambienti igienici esigenti
Codice prodotto:

SE740/2

SE740 Sensore ottico di ossigeno | M12 (8 pin) | 325 mm | Per ambienti igienici esigenti
SE740 Sensore ottico di ossigeno | M12 (8 pin) | 325 mm | Per ambienti igienici esigenti
Codice prodotto:

SE740/3

SE740 Sensore ottico di ossigeno | M12 (8 pin) | 425 mm | Per ambienti igienici esigenti
SE740 Sensore ottico di ossigeno | M12 (8 pin) | 425 mm | Per ambienti igienici esigenti
Codice prodotto:

SE740/4

Post rilevanti del blog

giu 2025

Interface Technology

High-Voltage Transducer, P45000, Functional Safety, Hydrogen, SIL, Energy

P45000 SIL 2 / SIL 3: Voltage measurements in applications with functional safety
P45000 SIL 2 / SIL 3: Voltage measurements in applications with functional safety

dic 2023

Company

|

Interface Technology

|

Process Analytics

Knick Austria - direct customer contact in Austria from 2024
Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology
 

dic 2023

Interface Technology

|

Company

SPS 2023 - Impressions
SPS 2023 - Impressions

set 2022

Interface Technology

Exhibition, InnoTrans

InnoTrans 2022 - three products as world firsts for rolling stock and DC traction power supply applications
At InnoTrans 2022 Knick presented 3 products as world firsts for rolling stock and DC traction power supply applications.

mag 2022

Interface Technology

Energy

Energy storage - the handshake between renewable energy and electric vehicles
Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.

feb 2022

Interface Technology

P52000VPD, Voltage

P52000VPD voltage presence detector reliably detects voltages up to 4200 V DC
The new P52000VPD voltage presence detector reliably monitors areas with high voltages and sends a signal to the downstream plant control system when a specified threshold value is reached.

set 2021

Interface Technology

USA, Exhibition

Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo
Knick will be showcasing high-voltage electrical measurement and signal conversion products.

mag 2021

Interface Technology

Quadruple Standard Signals in Just One Signal Conditioner
The A20340 can output a standard input signal to four calibrated and galvanically isolated outputs in parallel.

apr 2021

Interface Technology

Hydrogen

Electrical measurement and process analytics for hydrogen production
Knick products optimize hydrogen production in the process and in electrolyser operation.

mar 2021

Interface Technology

High-Voltage Transducer, USA, P44000

Condition Monitoring of High-Voltage Motors
Having an active predictive maintenance campaign in place for large rotating equipment can be a key strategy for maximizing process uptime.

mar 2021

Interface Technology

Pulse frequency conditioner for speed sensors
The new P16000 from Knick is a pulse frequency conditioner that converts frequency signals from speed sensors into standard signals.

nov 2020

Interface Technology

High-Voltage Transducer, Voltage, P42000D2

Worldwide smallest transducer up to ±2200 V
The P40000 series from Knick enables reliable voltage measurements from ±50 mV to ±3600 V and current measurements from ±100 mA to ±20 kA.

ago 2020

Interface Technology

DC

Importance of broad-range power supplies for DC electrical measurement
Many DC electrical measurement products manufactured by Knick contain universal, also known as broad-range, power supplies.

lug 2020

Interface Technology

High-Voltage Transducer, DC, P29000

Measuring Photovoltaic Degradation
Photovoltaic (PV) array degradation is an important aspect to consider for system design and installation.

giu 2020

Interface Technology

High-Voltage Transducer, USA

Electrical Measurement Solutions: Control from 480 to 4800 Volts
Voltage and current transducers from Knick bring true control to electrical measurement applications across a wide-range of industries.

giu 2020

Interface Technology

High-Voltage Transducer

Benefits of High Voltage Transducers versus Instrument Transformers
When a need arises to step voltage in a circuit either up or down for purposes of power transmission or distribution, there is no doubt that transformers are essential.

nov 2019

Interface Technology

DC, USA, Current

Shunt Resistor versus Hall Effect Technology
There are many systems where measurement of large DC currents are needed for performance and safety.

mar 2018

Interface Technology

MTBF beyond 3000 years: A snap hook for your plant
Failure of equipment on the plant floor can lead to considerable and costly disruption.

gen 2018

Interface Technology

UL

Knick Products Comply With UL - What Does That Mean?
There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.

nov 2017

Interface Technology

High-Voltage Transducer, P50000

High-voltage transducer offers more safety on railway vehicles
The requirements placed on railway vehicles have increased significantly in recent years. Products for rolling stock need to ensure a higher level of functional safety than ever before.

feb 2017

Interface Technology

P41000TRMS

True RMS Measurement with P41000TRMS
Traditional millivolt AC transducers are very susceptible to errors due to their poor insulation and are only designed for pure sinewave measurement.

feb 2017

Interface Technology

SIL, P22400

Functional safety and maximum availability can go together
The requirements on operational and safety-related circuits are continuously growing.